"Cabinet body :

Side plate, roof plate, baffle, and bottom plate of base box: made of 15mm thick environmental-friendly boards;

Top plate of base box and drawer : made of 15mm thick MDF;

Side plate of drawer and rear maintenance plate: made of 15mm thick environmental-friendly MDF;

Bottom plate of drawer : made of 10mm thick environmental-friendly MDF;

Edge plate: made of 1.0mm PVC; 

Edge sealing material for top plate of drawer and door : 2.0mm PVC. 

柜体部分：

基箱侧板、上顶板、隔板、底板：采用15mm厚的环保中纤板加工制作；

基箱面板、抽屉面板：采用15mm厚的中纤板加工制作；

抽屉侧板、后维修板：采用15mm厚的环保中纤板加工制作；

抽屉底板：采用10mm厚的环保中纤板加工制作；

封边：基箱板材封边均为1.0mm的PVC封边；

抽屉面板、门面板的封边材料：为2.0mmPVC封边。

Platform top: 

Steel wooden central experimental platform can use solid boards and top boards (epoxy resin board, phenolic resin board, granite, stainless steel, ceramic, etc.) with color of black and offwhite.

台面部分：

钢木中央实验台面可采用实芯板、贴面板（环氧树脂板、酚醛树脂板、花岗岩、不锈钢台面、陶瓷等，可供选择）；颜色有黑色、灰白色可供客户选择。

frame:

Steel support uses 40*60 cold rolled rectangular steel pipe, supporting column uses the same size steel pipe with two sides welded with cold rolled U-steel, the surface is plated with color zinc for rust prevention and spray epoxy resin after acid washing, phosphatization and electrostatic powder by carbon dioxide arc welding to make acid-alkali resistant surface. The adhesion of protective layer meets the requirements of drop impact test and static load bearing＞250kg. Supporting column can be directly hung beside the cabinet without damaging the wall.

框架：

钢支架采用40*60的冷轧矩形钢管，支撑立柱为同规格钢管两面组焊镶嵌冷轧槽钢，表面电镀彩锌作防锈预处理，经二氧化碳冷焊组合后再酸洗、磷化并静电粉沫喷涂环氧化树脂防护层作耐酸碱耐腐蚀表面处理，其保护层附着力经落物撞击测试合格，静态承重＞250公斤，支撑立柱可直接悬挂呆柜，无须破坏墙身。